Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removing - refitting heater plugs

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Fuel system (98 range, 1910 JTD) › Removing - refitting heater plugs
10 EngineRemoving - refitting heater plugs · page 1 of 2
Diagram showing the electrical connector for the flow meter
Diagram showing the pipe section between the air filter casing and turbocharger

REMOVING - REFITTING HEATER PLUGS

  • Disable the alarm (if fitted) via the switch under the junction unit cover.
  • Disconnect the terminals and remove the battery.
  1. Disconnect the electrical connection for the flow meter.
Diagram showing the first section of the pipe between the air filter casing and the turbocharger
  1. Loosen the bands and remove the first section of the pipe between the air filter casing and the turbocharger.
  2. Remove the second section of the pipe between the air filter casing and the turbocharger.
Diagram showing the upper engine protective cover and fixing bolts
  1. Undo the fixing bolts and remove the upper engine protective cover.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.