Removing - refitting

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Removing-refitting (1910 TD 100) › Removing - refitting

10 EngineRemoving - refitting · page 1 of 3

REMOVING - REFITTING

Position the vehicle on a lift, remove the front wheels and disconnect the battery negative terminal. Then proceed as follows.

1. Remove the upper engine guard.
2. Disconnect the battery positive terminal, unscrew the nut securing the battery to its cradle and remove from the engine bay.
3. Unscrew the retaining bolts shown and remove the air shroud shown in the figure.
4. Raise the lift and remove the lower engine bay guard.

02 Engine