Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removing - refitting

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (1910 TD 100) › Removing - refitting
10 EngineRemoving - refitting · page 1 of 8

Removing - refitting

Diagram showing the first section of the air intake pipe with clips, bolts and connection points labeled 1, 2, 3
Diagram showing the second section of the air intake pipe with clip, screw and electrical connections labeled 1, 2, 3

  1. Loosen clips (1), unscrew bolts (2), disconnect connection (3) and then disconnect the first section of the air intake pipe complete with debimeter.
  2. Loosen clip (1), unscrew screw (2) disconnect electrical connections (3) and then disconnect the second section of the air intake pipe.
  3. Open both clips and release cable (1), disconnect cable (2) and then move glow plug ECU (3) with its bracket to one side.
  4. Disconnect the two pipes leading from the heater unit from the thermostat.
  5. Disconnect both fan electrical connections.

Diagram showing the glow plug ECU with cables and bracket labeled 1, 2, 3
Diagram showing the heater unit pipes connected to the thermostat
Diagram showing the fan electrical connections on the engine

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.