Removing - refitting (page 7 of 8)

1. Remove the bolts indicated from the bell housing in order to position the tool used to remove the power unit.

2. Position tool 1860860000 used to mount the power unit on the hydraulic jack and fasten to the power unit using the tools shown.

The hydraulic jack must have a capacity of at least 1000 kg and it must be sufficiently high to allow the power unit to be removed from below. When calculating the height, consider the maximum height setting of the lift and the minimum height setting of the hydraulic jack.

3. Remove the engine oil heat exchanger from the fastenings shown, then secure to the power unit.