Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removing - refitting (page 2 of 8)

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (1910 TD 100)
10 EngineRemoving - refitting · page 2 of 8
Diagram showing the front of the engine bay with arrows indicating bolts retaining the radiator to the body and the direction of removal.
Diagram showing the side of the engine bay focusing on the clutch release cable connection point on the gearbox.
  1. Unscrew both bolts retaining the radiator to the body, then remove the radiator - fan assembly.
Diagram showing the gear selection and engagement cables connected to the gearbox, with arrows pointing to the disconnect points.
  1. Disconnect the clutch release cable from the anchorages on the gearbox.
  1. Disconnect the gear selection and en- gagement cables from the points indicat- ed, taking care not to damage the cables as the head is removed.
  1. Disconnect both expansion tank pipes from the points indciated.
Diagram showing the expansion tank and its two pipe connections indicated by arrows.
  1. Disconnect fuel outlet and inlet lines (1) and (2) and pipe (3) carrying fuel from the diesel filter to the injection pump.
Diagram showing the fuel lines at the injection pump, with callout numbers 1, 2, and 3 identifying the outlet line, inlet line, and return pipe respectively.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.