Removing - refitting (page 8 of 8)

P4A11FX01

P4A11FX02

1. Remove the central power unit mount by unscrewing the bolts retaining it to the body.
2. Remove the timing end engine mount by unscrewing the central bolt.
3. Disconnect the gearbox end engine mount by unscrewing the retaining bolts shown.
4. Lower the hydraulic jack and remove the power unit from below the vehicle.

Lower the hydraulic jack gradually and check that the power unit is correctly positioned and balanced on the mounting tool.

• Position the power unit on a stand using a hydraulic hoist.

Use a hydraulic hoist to move the power unit, once it has been released from the mounting tool.

NOTE To refit the power unit, carry out removal operations in reverse order.

- Prepare the engine bay to fit the power unit. Take care to arrange all electrical leads, pipes etc. so that they do not get in the way when the engine is refitted;

P4A11FX03

P4A11FX04