Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removing - refitting (page 6 of 8)

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (1910 TD 100)
10 EngineRemoving - refitting · page 6 of 8
Diagram showing the glove compartment area with arrows indicating retaining bolts to be removed.
Diagram showing the engine wiring assembly and relay bracket area under the dashboard.
Diagram showing the constant velocity joints and half-axles connected to the gearbox flange.

  1. Working from inside the vehicle, remove the glove compartment by unscrewing the retaining bolts shown.
  2. Disconnect connector from the i.e. control unit and withdraw the relay from its bracket. Then withdraw the engine wiring assembly and attach to the power unit.
  3. Disconnect the half-axles by undoing the bolts securing the constant velocity joints to the gearbox flange.
  4. Unscrew bolt (1) and loosen bolt (2) retaining the suspension pillar. Then turn the pillar outward to release the drive shaft from its attachment on the differential.
Diagram of the suspension pillar and drive shaft attachment point, with callout numbers 1 and 2 identifying specific bolts.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.