Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)02 · 10 Engine
02 · Engine

Removing - refitting (page 3 of 3)

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Removing-refitting (1910 TD 100)
10 EngineRemoving - refitting · page 3 of 3
Diagram showing a curved pipe connected to the intake manifold area with arrows indicating connection points.
Diagram showing coolant pipes with arrows pointing to the intake and outlet connection points.
Diagram of the relay case cover area with an arrow pointing to a bolt, accompanied by icons indicating lifting and lowering actions.
  1. Remove the pipe indicated by disconnecting from the clip located on the intake manifold.
  2. Remove the coolant intake and outlet pipes from the points shown.
  3. Unscrew the relay case cover bolt shown in the figure.
  4. Unscrew the nuts illustrated and place the relay box to one side in the engine bay
  5. Unscrew bolts (1), loosen bolt (2) and then remove the battery cradle.
Diagram showing the relay box being moved aside with arrows indicating the direction of movement.
Diagram of the engine bay showing the battery cradle area with callout numbers 1 and 2 identifying specific bolts.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.