Removing - refitting (page 2 of 3)

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Removing-refitting (1910 TD 100)

10 EngineRemoving - refitting · page 2 of 3

1. Use tool 1878077000 to undo the stud, unscrew the bolts and release the dust guard from its seat.
2. Remove the wheel arch guard shown.
3. Disconnect sleeve (1) connecting turbine - intercooler and air outlet sleeve (2) from intercooler to intake manifold.
4. Position the hydraulic jack to support the power unit and remove the engine mount on the body. Lower the engine and re- move the intercooler with bracket. Repo- sition the engine mount when the opera- tion is complete.
5. Position a container to recover the engine coolant, then disconnect the coolant in- take sleeve from the radiator.

02 Engine