Removing-refitting clutch pedal

REMOVING-REFITTING CLUTCH PEDAL

Before removing the clutch pedal, remove the accelerator pedal as described in "Section 10 - Fuel system".

1. Remove the roll pin retaining the clutch pump rod to the pedal.
2. Remove the car brake light switch to facilitate access to the clutch and brake pedal retaining bolt.
3. Unscrew the bolt retaining the clutch and brake pedal, withdraw in the arrowed direction until the clutch pedal is released.

If brake pedal removal is not required, do not take the bolt retaining the clutch and brake pedal any further out.

4. Release the clutch pedal from the clutch pump rod and remove from the pedal unit.