Removing-refitting clutch pump

REMOVING-REFITTING CLUTCH PUMP

1. After removing the upper cam cover protection and the guard in front of the brake and clutch fluid reservoir, unscrew the bolts retaining the diesel filter bracket, disconnect the connectors indicated and position the bracket to one side without disconnecting the diesel lines.
2. Drain the brake and clutch fluid from the reservoir.
3. Disconnect the pipe connected to the clutch pump from the brake and clutch fluid reservoir.
4. Disconnect the fitting of the line connected to the slave cylinder from the clutch pump.
5. From inside the car, remove the left foot rest and disconnect the air pipe from the points indicated, then position to one side.