Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)03 · 18 Clutch
03 · Transmission

Removing-refitting slave cylinder

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Clutch operation (99 range) › Removing-refitting slave cylinder
18 ClutchRemoving-refitting slave cylinder
Diagram showing the pipe connecting the clutch pump-slave cylinder secured by a retaining clip
Diagram showing the pipe fitting on the slave cylinder being disconnected
Diagram illustrating the bolts retaining the slave cylinder to the engine bay
  1. Release the pipe connecting clutch pump - slave cylinder from the retaining clip shown in the figure.
  2. Disconnect the pipe fitting on the slave cylinder and then remove the pipe.

REMOVING-REFITTING SLAVE CYLINDER

Remove: battery, relay box, battery cradle as described for removal of the clutch pump connection pipe - slave cylinder. Also disconnect the pipe connecting clutch pump - slave cylinder on the slave cylinder.

Isolated view of the removed slave cylinder

3-4. Unscrew the bolts retaining the slave cylinder and remove from the engine bay.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.