Removing-refitting slave cylinder

1. Release the relay box from the battery cradle by undoing the retaining bolts. Then remove the cradle by undoing the bolts indicated and disconnecting the wiring bundle.
2. Unscrew the fitting of the pipe connected to the clutch pump on the slave cylinder, detach the pipe from the retaining clips and remove from the car.

REMOVING-REFITTING SLAVE CYLINDER

Drain the brake and clutch fluid, remove the battery, the cradle and the relay box as described in the previous paragraph.

3. Undo nuts retaining bracket (1) and remove; disconnect the clips indicated and remove the flow meter in order to gain access to the underlying slave cylinder.
4. Disconnect the fitting of the pipe connected to the clutch pump, then unscrew the slave cylinder retaining bolts and remove from the car.

Bleeding clutch system