Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)08 · 50 Auxiliary units
08 · General

Outside air temperature sensor

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Climate control (98 range) › Outside air temperature sensor
50 Auxiliary unitsOutside air temperature sensor

Outside air temperature sensor

It is on the right external rear view mirror.

It consists of an NTC sensor where the resistance decreases with the temperature - (R at 25°C = 10 kOhm), with an operating range of between -30°C and +50°C

Treated air temperature sensor

It is inside the distributor assembly immediately upstream of the distribution flaps for the air flows to the various vents.

It consists of an NTC sensor (R at 25°C = 10 kOhm), with an operating range of between 0°C and +80°C

Requested temperature potentiometer

This potentiometer is connected to the temperature knob and detects the various angular positions, sending a signal to the electronic control unit for a total of 15 different positions (one for each degree centigrade) with two extreme positions "LO" and "HI".

It receives a 5V supply from the control unit and has a controlled earth and gives a signal which corresponds to the position of the knob:

R1 - R16= 681 Ohm ± 1%

Car side mirror assembly removal and wiring diagram

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.