Dismantling (page 2 of 3)

Make

Fiat

Model

Bravo /Brava (182) Factory Service Manual

Year

1995–2001

Section

Manual heater

50 Auxiliary unitsDismantling · page 2 of 3

• remove the shake-proof washer (1) as appropriate and withdraw from the lug of the lever (2) the coiled eyelet end of the flexible transmission cable (A), and disengage the latter from the assembly by releasing its sheath from the retaining clip (3) after removing (shifting) the safety clamp;

• Release the flexible transmission sheath (B) from its retaining clip (4), and disengage the coiled eyelet end of the cable from the L-shaped lug on the lever (5);
• remove the clamp (6) (by shifting it as appropriate) and release the flexible cable sheath (C) from the clip underneath, then disengage the coiled eyelet end of the cable from the L-shaped lug on the lever (7);
• shift the spring (8) which secures the controls mounting (9) laterally in the direction of the arrow, so that it comes out of its seating on the heater-distributor unit;
• separate the controls mounting complete with flexible cables and electrical wiring from the heater-distributor unit;

08 General