Dismantling

Dismantling

Carry out the following operations:

• undo the screws (arrowed) which secure the top and side (right side) of the heater-distributor unit’s cover (1);
• undo the three bolts (2), taking care not to lose the nuts inserted in the seatings on the split connector (3) of the heater radiator;
• remove the plate (4) and disconnect the two metal pipes (A) from the split connector of the heater radiator;
• disconnect the connectors (5 and 6) from the resistor (7) and electric fan (8) respectively, and release the wiring (9) from the various clips securing it to the heater-distributor unit;