55D. (page 2 of 2)
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Connectors
55 Electrical system55D. · page 2 of 2
The insufficient engine oil pressure warning light is not working
- Bridge the HG coloured cable at the insufficient engine oil pressure sensor 142 with an earth
- OK
- Replace the insufficient engine oil pressure sensor 142
- Not OK
- Bridge the HG coloured cable at connector 55 with an earth
- OK
- Restore the continuity for the HG coloured cable between connector 55 & switch 142
- Not OK
- Bridge the HG coloured cable at the instrument panel 6 connector A pin 12 with an earth
- OK
- Restore continuity for the HG coloured cable between the instrument panel 6 connector A & connector 55
- Not OK
- Check the condition of the insufficient engine oil pressure warning light B in the instrument panel 6
- Not OK
- Replace the warning light B
- OK
- Check the condition of the instrument panel 6
- Not OK
- Overhaul the instrument panel 6
Parts & tools for this job For 1995 Fiat Bravo
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.