55D. (page 2 of 2)

The left front brake pad wear warning light is not working (Only for HGT trim level)

Bridge the BR coloured cable at connector 89A with an earth

• OK → Replace the left front brake pad wear sensor 89, or restore the continuity for the M coloured cable M between connector 89A & the sensor, or restore the connection to earth
• Not OK → Bridge the BR coloured cable at the instrument panel 6 connector A pin 8 with an earth

• OK → Restore the continuity for the BR coloured cable between connector 89A & the ultrasound welding (See wiring diagram)
• Not OK → Overhaul the instrument panel 6

The right front brake pad wear warning light is not working (Only for HGT trim level)

Bridge the BR coloured cable at connector 182A with an earth

• OK → Replace the right front brake pad wear sensor 182A, or restore the continuity for the M coloured cable between connector 182A and the sensor, or restore the connection to earth
• Not OK → Bridge the BR coloured cable at connector 13 with an earth

• OK → Restore the continuity for the BR coloured cable between connector 13 & connector 182A
• Not OK → Bridge the BR coloured cable at the instrument panel 6 connector A pin 8 with an earth

• OK → Restore the continuity for the BR coloured cable between connector 13 & the ultrasound welding