55D. (page 4 of 5)

The righ rear central locking motor is not working (Non existent for the Bravo versions)

1. F1 Extract connectors 86 & 108 from their housings, bridge the H/G coloured cables at connector 86 and insert an ohmmeter between the H/G coloured cables at the connector for the lock 108
2. Not OK
3. F3 Restore the continuity for the H/G coloured cables between the connector 86 and the lock assembly 108
4. OK
5. F2 Check the condition of the left rear central locking motor 108
6. Not OK
7. F4 Overhaul or replace the central locking motor 108
8. F5 Extract connectors 112 & 87 from their housings, bridge the H/G col. cables at the central locking c/unit connector 112 & insert an ohm-meter btwn the H/G col. cables for connector 87
9. Not OK
10. F8 Restore the continuity for the H/G coloured cables between the ultrasound welding and the connector 87
11. OK
12. F6 Extract connectors 87 & 109 from their housings, bridge the H/G coloured cables at connector 87 & insert an ohmmeter btwn the H/G coloured cables at the connector for the lock assy 109
13. Not OK
14. F9 Restore the continuity for the H/G coloured cables between the connector 87 and the lock assembly 109
15. OK
16. F7 Check the condition of the left rear central locking motor 109
17. Not OK
18. F10 Overhaul or replace the central locking motor 109