Flat CODE (page 2 of 3)

When the CODE warning light goes out, turn the MASTER key to the ignition off (STOP) position.

Within 10 seconds:

• withdraw the MASTER key from the ignition switch block;
• insert a new key (1) in the ignition switch block and turn it to the on (+15), position; the CODE warning light will come on for 0.7 s.

When the CODE warning light goes out, turn the key (1) to the ignition off (STOP) position.

Within 10 seconds:

• withdraw the key (1) from the ignition switch block;
• insert a new key (2) in the ignition switch block and turn it to the on position (+15); the CODE warning light will come on for 0.7 s.

When the CODE warning light goes out, turn the key (2) to the off (STOP) position.