Paati5lot

PAATI5LOT

Overhauling

In the case of failed or irregular alternator recharging, completely dismantle the alternator and carry out the following checks:

• check the belt tension;
• check the tightening of the nut at the positive alternator terminal (B+), making sure that the washer is fitted;
• check the tightening of the nut at the energizing terminal (D+), making sure that the washer is fitted;
• check the tightening of the nuts at the positive connector block in the engine compartment;
• check the tightening of the bolts fixing the negative battery terminal on the bodyshell;
• check that the battery terminals are clean and properly tightened.

1. Position the alternator as shown and remove the plastic protection acting on the tabs shown.
2. Undo the nuts shown in the diagram;.
3. Undo the bolts shown in the diagram.
4. Using a metal-cutter disconnect all the contacts shown and remove the plate.