Identification of connector terminals
- Make
- Fiat
- Model
- Bravo /Brava (182) Factory Service Manual
- Year
- 1995–2001
- Section
- Various devices › Identification of connector terminals
55 Electrical systemIdentification of connector terminals
IDENTIFICATION OF CONNECTOR TERMINALS
Connector A
| Pin no. | Wire colour | Circuit involved |
|---|---|---|
| 1 | HN | Windscreen wiper and brake |
| 2 | H | Windscreen wiper - High speed |
| 3 | - | Not connected |
| 4 | HG | Windscreen wiper Intermittent/Low speed |
| 5 | S | Bidirectional pump |
| 6 | SN | Bidirectional pump |
| 7 | SG | Headlamp washer control |
| 8 | N | Earth |
| 9 | - | Trailer indicators warning light |
Connector B
| Pin no. | Wire colour | Circuit involved |
|---|---|---|
| 1 | - | Northern Europe legislation |
| 2 | - | Northern Europe legislation |
| 3 | HR | Dipped headlamps |
| 4 | LR | Main beam headlamps |
| 5 | CB | Int/A |
| 6 | AG | Int |
| 7 | GV | Side lights |
Connector C
| Pin no. | Wire colour | Circuit involved |
|---|---|---|
| 1 | - | Not used |
| 2 | HL | Rear fog lamps enablement |
| 3 | AG | Int/A |
| 4 | AN | Right direction indicator |
| 5 | LR | Hazard lights indicator |
| 6 | A | Right direction indicator |
Connector D
| Pin no. | Wire colour | Circuit involved |
|---|---|---|
| 1 | - | Not connected |
| 2 | LB | +30 |
| 3 | LN | Horn |
| 4 | - | Not connected |
| 5 | CN | Positive Windscreen wash/wipe-rear window washer |
| 6 | CL | Rear window wiper |
| 7 | CB | Rear window wiper and brake |
STALK UNIT RIGHT LEVER
The stalk unit right lever controls the windscreen wiper (two speeds + intermittent operation) and the windscreen washer pump in accordance with the following logic:
- When the right lever is moved downwards one click, the switch is activated, switching on the windscreen wiper intermittent function at the rate of about 15 wipes a minute.
- When the switch is moved two clicks downwards, intermittent operation at about 35 wipes a minute is selected.
Operation remains the same as above, except that the pause time between wipes is reduced to 2 seconds.
- By moving the switch three clicks downwards, continuous operation of the windscreen wiper is switched on at 45 wipes a minute.
If from the STOP position the lever is pushed upwards and held in this position, continuous operation of the windscreen wiper is still selected, but with the lever in an unstable position.
In other words, the windscreen operates for as long as the lever is held in that position, and stops as soon as the lever is released.
Parts & tools for this job For 1995 Fiat Bravo
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.