Workshop Manuals Factory service & repair Fiat
01 00 Introduction and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 33 Braking system06 41 Steering07 44 Suspension and wheels08 50 Auxiliary units09 55 Electrical system10 70 Bodywork
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)09 · 55 Electrical system
09 · Electrical

Removing-refitting radiator fan

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Various devices › Removing-refitting radiator fan
55 Electrical systemRemoving-refitting radiator fan
Diagram showing the air duct and surrounding engine components, labeled P4A046L01
Diagram showing the upper section of the radiator fan assembly with arrows indicating bolt locations, labeled P4A046L02

REMOVING-REFITTING RADIATOR FAN

Diagram showing the sound-proofing shield removed from the car, labeled P4A046L03
  1. Place the car on ramps, disconnect the battery’s negative cable, then remove the air duct.
  2. Undo the fan’s top bolts and the connections indicated.
  3. Lift the car and remove the bottom sound-proofing shield from the car.
  4. Undo the fan’s bottom bolts.
  5. Remove the fan from the car.

The operations described above may not apply if the engine or version are not the same as that illustrated above.

Diagram showing the lower section of the radiator fan assembly with arrows indicating bolt locations, labeled P4A046L04
Diagram showing the complete radiator fan unit removed from the car, labeled P4A046L05

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.