Stalk unit

STALK UNIT

Removing-refitting

(for versions without Air Bag)

NOTE For versions with Air Bag, refer to the relevant sub-section.

1. Disconnect the battery's negative terminal, then remove the horn cover after disconnecting its connections.
2. Undo the nut (arrowed) and remove the steering wheel from the car.
3. Undo the screws (arrowed) and remove the steering column bottom shroud.
4. Undo the screws (arrowed) and remove the steering column upper shroud.
5. Undo the socket-headed screw and disconnect the relevant connectors, then remove the stalk unit from the car.