Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)10 · 70 Bodywork
10 · Body & interior

Finishing operations

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Replacing structural body panels › Finishing operations
70 BodyworkFinishing operations

Finishing operations

  1. Correct any distortions to the panel using a hammer and dolly block.
  2. Remove any weld slag using a disc grinder.

Checking alignments

  1. Check the parallelism, openings and angles (this involves fitting the moving components previously removed with seals and parts which, once fitted, make it possible to check that the operations have been carried out correctly).
Diagram of car body side showing alignment checks at roof, door, and sill areas, with inset detail of a measuring tool and parallel lines.

Protections

  1. Apply the electro-phoretic protective treatment to the areas previously involved in the welding.
  2. Seal the joins between the replacment panels and the bodyshell, using IVI 854210 transparent acrylic sealant or an equivalent product.
  3. Proceed with the painting and waxing stage.
  4. Apply wax based oil protective.
Diagram of car interior B-pillar and door area showing application of sealant and protective coatings, with insets of spray guns and applicator tools.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.