Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)10 · 70 Bodywork
10 · Body & interior

Positioning the replacement internal panel

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Replacing structural body panels › Positioning the replacement internal panel
70 BodyworkPositioning the replacement internal panel

Positioning the replacement internal panel

  1. Correctly position the internal panel using the template.
  2. Check that the internal panel is perfectly positioned.
  3. Fix the replacement part to the bodyshell using the special self-locking clamps.
Diagram showing the positioning of the replacement internal panel on the vehicle frame using clamps and a template, with callout icons for alignment and clamping tools.

Welding the replacement internal panel

  1. Carry out spot welding by the floor.
  2. Continue the spot welding on the edges in contact with the bodyshell.
  3. Carry out spot welding on the front cross member.
Diagram showing the spot welding locations on the replacement internal panel, highlighting weld points along the floor, edges, and front cross member with inset detail views.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.