Fitting seat belt with pretensioner

FITTING SEAT BELT WITH PRETENSIONER

When fitting pretensioner assembly (1) to the car, firstly secure pretensioner (1) and bracket (6) (the latter is only fitted on the 5 door version) to the body by means of bolts (2), which must be tightened to a torque of 4 daNm. Then secure firing bracket (3) by means of double-headed bolt with pre-established break point (4). Tighten to 0.4 daNm.

NOTE Note that the system will only work correctly if the head of bolt (4) breaks in the required area. The bolt and firing bracket (3) are supplied as a single part and must be replaced whenever the pretensioner is removed.