Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)10 · 70 Bodywork
10 · Body & interior

Seat belt pre-tensioner

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Seat belt pretensioner › Seat belt pre-tensioner
70 BodyworkSeat belt pre-tensioner

Seat belt pre-tensioner

Diagram showing the side panel removed from the vehicle interior
Diagram showing a tool removing a spring and retaining pin from the seat belt assembly

P4A044M02

  1. Remove the side panel from the vehicle.
  2. Remove the spring and remove the retaining pin shown, then release the belt.
  3. Remove the upper trim for the seat belt and undo the fixing nut underneath.
  4. Undo the bolt fixing the pre-tensioner to the bodyshell (to remove the bracket, proceed as described on page 38).
  5. Remove the pre-tensioner from the vehicle.
Diagram showing the upper trim for the seat belt being removed and a fixing nut underneath

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.