Equipment

The windows on the Bravo-Brava meet industrial standards concerning the methods of removing/refitting fixed window glasses. This system is greatly advantageous, both in terms of quality because it ensures perfect permeability and resistance to air and in terms of safety because it makes the structure stronger and quieter.

In addition to the windscreen and the rearscreen the 3 door version also has bonded side rear windows.

EQUIPMENT

In order to remove and refit bonded windows the products and equipment described below must be used

Composition of Kit

1. Cartridge of GURIT BETASEAL sealant
2. 1/2 Cartridge of GURIT BETASEAL sealant
3. Adhesion promoter (primer) for glass
4. Container of de-greasing product
5. Cloth for de-greasing
6. Wad for applying adhesion promoter (primer)
7. Wire
8. N° 2 diffusors

The previous adhesive marketed by Direzione Marketing e Commerciale Volvera has been replaced with an improved product. It is BETASEAL 1703 Sprint, in single compound polyurethane with rapid polymerization. This is undoubtedly an advantage because the greater the hardening speed of the adhesive, the less time the window has to be retained with special equipment. In addition the repaired vehicle can be returned sooner to the Customer.

The mechanical characteristics conform with Capitolato Fiat Auto S.P.A.