Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)10 · 70 Bodywork
10 · Body & interior

Replacing third fixed window

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Window glasses › Replacing third fixed window
70 BodyworkReplacing third fixed window

REPLACING THIRD FIXED WINDOW

Removing trim and protection from vehicle

The diagram below shows the components to be removed before moving onto the subsequent preparation stages.

  • Protect the outer perimeter of the third glass housing with adhesive tape
  • Slightly lower the roof lining, then position the appropriate spacers.
Diagram showing the interior rear section of the vehicle with numbered callouts for the rear panel inner lining, centre pillar cover, rear pillar cover, passenger grab handle, fixed glass, threaded reference pins, and retaining clips.
  1. Rear panel inner lining
  2. Centre pillar cover
  3. Rear pillar cover
  4. Passenger grab handle
  5. Fixed glass
  6. Threaded reference pins
  7. Retaining clips

NOTE It is preferable to cut the sealant working from inside the vehicle using an appropriate blade to prevent scratching the bodywork.

Open the retaining clips (7) before cutting the sealant.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.