Workshop Manuals Factory service & repair Fiat
Fiat Bravo/Brava (182) Factory Service Manual (1995-2001)10 · 70 Bodywork
10 · Body & interior

Refitting

Make
Fiat
Model
Bravo /Brava (182) Factory Service Manual
Year
1995–2001
Section
Window glasses › Refitting
70 BodyworkRefitting

Refitting

Before refitting, prepare both the window and the housing in the tailgate, following the instructions for the windscreen (see page 50).

To ensure that the rearscreen is correctly aligned with the bodyshell, refit the trim (1) at the base of the window and the trims (2) at the inner edges of the tailgate. Take the position of the opening in the windscreen wiper motor pin into consideration. Then apply the references (3).

Diagram showing the rear window assembly with callout numbers 1, 2, and 3 indicating trim pieces and alignment points, including two inset detail views of the trim profile and attachment.
Diagram showing a rear window seal with dimension lines indicating measurements of 10, 20, 20, and 60.
  • Extrude a bead of sealant, along the perimeter of the rearscreen scrupulously following the figures given in the diagrams.

Parts & tools for this job For 1995 Fiat Bravo

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.