Intake air pressure/temperature sensor - r r

Operation 1056B54 · MULTI-POINT INJECTION SYSTEM (MPI)

1.2 8v

Removing

Disconnect the negative battery terminal.

1. Disconnect the electrical connector for the sensor.

2. Undo the fixing bolt (2a) and remove the sensor (2b).

Refitting

Fit the sensor and tighten the fixing bolts.

Connect the electrical connector for the sensor.

Connect the negative battery terminal.

1.6 16v

Removing

Disconnect the negative battery lead.

1. Disconnect the electrical connection from the intake air pressure/temperature sensor.

2. Undo the bolts (2a) and remove the intake air temperature/pressure sensor (2b).

Refitting

Place the intake air temperature/pressure sensor back in its housing and secure it using the bolts.

Connect the electrical connection to the intake air pressure/temperature sensor.

Connect the negative battery lead.

1.4 8v

Removing

- Disconnect the negative battery terminal.

1. Disconnect electrical connection (1a), unscrew the bolt and remove the intake air pressure/temperature sensor (1b).

Refitting

- Place the intake air temperature/pressure sensor back in its housing, secure it using the bolt and connect the electrical connection.

- Connect the negative battery terminal.