Throttle body intergral with mds - r r

Operation 1056B15 · MULTI-POINT INJECTION SYSTEM (MPI)

1.6 16v

Removing

Op. 1048A32 HOSE FROM AIR FILTER TO INTAKE MANIFOLD - R.R.

1. Undo the retaining clip and release the system pipe

2. Disconnect the electrical connection.

3. Remove the three bolts (3a) and move bracket (3b) aside.

4. Undo the retaining bolt (4a) and remove throttle body (4b).

Refitting

Replace the throttle body with bracket back in its housing and fix it tightening the bolts to the recommended torque.

Restore the electrical connection and secure the cooling system pipe using the retaining clip.

Op. 1048A32 HOSE FROM AIR FILTER TO INTAKE MANIFOLD - R.R.

If the throttle body integrated with MDS is replaced, re-initialise the injection-ignition control unit

Op. 1056B81 RUN ELECTRONIC IGNITION/INJECTION CONTROL UNIT (SINGLE) SELF-LEARNING PROCEDURE