Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Doblò Factory Service Manual (2000-2010)19 · Wiring diagrams and electrical functions
19 · Electrical

Main beam headlights - description

Make
Fiat
Model
Doblò Factory Service Manual
Year
2000–2010
Section
Exterior lighting › Main beam headlights - description
Wiring diagrams and electrical functionsMain beam headlights - description

MAIN BEAM HEADLIGHTS - DESCRIPTION

1.4 8v, 1.6 16v, 1.3 JTD 16V, 1.9 JTD 8V · from 12/03 · MY 2005

The vehicle is fitted with two special main beam headlamps.

These are activated:

- with the dipped beams on, by pushing the stalk toward the facia (stable mode);

- in flashing mode, by pulling the lever toward the steering wheel (unstable mode).

The circuit is protected by two fuses in the engine compartment junction unit. one for the right headlamp and one for the left.

A warning light on the instrument panel indicates main beam activation.

Parts & tools for this job For 2000 Fiat Doblò

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.