Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Doblò Factory Service Manual (2000-2010)19 · Wiring diagrams and electrical functions
19 · Electrical

Instrument lighting - description

Make
Fiat
Model
Doblò Factory Service Manual
Year
2000–2010
Section
Interior lighting › Instrument lighting - description
Wiring diagrams and electrical functionsInstrument lighting - description

INSTRUMENT LIGHTING - DESCRIPTION

1.2 8v, 1.6 16v, 1.3 JTD 16V, 1.9 JTD 8V, 1.9 DIESEL

Description

All the instruments (dials and gauges) are lit up with the ignition switched ON.

All the instrument panel LEDs are always lit up at the same brightness.

The LEDs for lighting the instrument scales are activated when the side lights on message is received from the body computer.

1.4 8v, 1.6 16v, 1.3 JTD 16V, 1.9 JTD 8V · from 12/03 · MY 2005

The car is equipped with numerous light sources for optimal lighting of interior instruments and controls.

All instruments and controls (faces and guages) are lit up with key ON.

The instrument panel leds are kept permanently on at the same brightness level.

On versions with the COMFORT panel only, the brightness of the instrument scale and graph leds may be adjusted when the side lights are turned on.

Eight brightness levels are offered on the COMFORT panel version, from 30% to 100% of maxmum brightness.

Once the required brightness has been set, this is stored and then reused.

The brightness level may be adjusted by means of two “MODE + ” and “MODE – “ keys located to the right of the instrument panel near the windscreen wash/wipe stalk only when the instrument panel is on the standard screen and the side lights are on.

On versions with a COMFORT panel, when a fault message is displayed (apart from "ice danger), the display brightness is automatically set to maximum (daytime setting) even when the side lights are on.

The brightness level is fixed on MODALE and STRIP panels.

For further details,

See descriptions 5560 INSTRUMENTS

Parts & tools for this job For 2000 Fiat Doblò

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.