ENGINE OIL PUMP - R+R

Operation 1084B12 · ENGINE OIL LUBRICATION CIRCUIT

2.0 JTD 8V

Removing

Op. 7055B54 UNDER-ENGINE GUARD - R R

Op. 4450B04 RIGHT FRONT WHEEL R R

Op. 1092G10 SINGLE ENGINE BELT R R

See in Op. 1092A10

See in Op. 1032D12

See in Op. 1032B10

See in Op. 1032B44

Op. 1020A20 CRANK CASE OIL SUMP - R + R CLEAN SEALS FOR SEALANT APPLICATION

See in Op. 1020D14

1. Undo the fixing bolts.

2. Remove the oil pump (2a) complete with drive chain (2b), pinion (2c) and tab.

Refitting

- Fit the engine oil pump tightening the bolts to the recommended torque.

- Fit the chain, the pinion and the pinion fastening tabs.

See in Op. 1020D14

Op. 1020A20 CRANK CASE OIL SUMP - R + R CLEAN SEALS FOR SEALANT APPLICATION

See in Op. 1032B44

See in Op. 1032B10

See in Op. 1032D12

See in Op. 1092A10

Op. 1092G10 SINGLE ENGINE BELT R R

Op. 4450B04 RIGHT FRONT WHEEL R R

Op. 0010T11 ENGINE OIL CHECK LEVEL AND TOP UP

Op. 7055B54 UNDER-ENGINE GUARD - R R

- Remove the vehicle from the lift.