Variable geometry turbocharger exhaust manifold sleeve leading to exhaust pipe dismantle at bench
- Make
- Fiat
- Model
- Ducato Factory Service Manual
- Year
- 2002–2006
- Section
- Turbo charging system › Variable geometry turbocharger exhaust manifold sleeve leading to exhaust pipe dismantle at bench
‹ Prev Variable geometry turbocharger exhaust manifold assembly sleeveleading to exhaust pipe r rNext › Sleeve joining turbo charger and exhaust pipe - r + r and replace seal
EngineVariable geometry turbocharger exhaust manifold sleeve leading to exhaust pipe dismantle at bench
VARIABLE GEOMETRY TURBOCHARGER EXHAUST MANIFOLD SLEEVE LEADING TO EXHAUST PIPE DISMANTLE AT BENCH
Removing
- Position the turbocharger assembly and exhaust manifold in the vice.1. Undo the fixing nuts (1a) and disconnect the exhaust manifold (1b) from the turbocharger assembly.
1. Undo the fixing nuts (1a) and remove the fastening collar (1b).2. Remove the connecting hose between the turbine and the exhaust pipe and the gasket.
Refitting
- Fit a new gasket and the connecting hose between the turbine and the exhaust pipe.- Fit the fastening collar and tighten the fixing nuts.- Fit the exhaust manifold on the turbocharger assembly and tighten the fixing nuts.
‹ Prev Variable geometry turbocharger exhaust manifold assembly sleeveleading to exhaust pipe r rNext › Sleeve joining turbo charger and exhaust pipe - r + r and replace seal
Parts & tools for this job For 2002 Fiat Ducato
- PARTExhaust gasketSearch: Fiat Ducato 2002 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.