Crankcase sump and covers – auxiliary unit
- Make
- Fiat
- Model
- Ducato Factory Service Manual
- Year
- 2002–2006
- Section
- Engine › Crankcase sump and covers – auxiliary unit
‹ Prev Crankcase sump and covers – oil seals on crankshaftNext › Crankshaft and flywheel – crankshaft
Special toolsCrankcase sump and covers – auxiliary unit
CRANKCASE SUMP AND COVERS – AUXILIARY UNIT
| Description | Code | Function | Validity |
|---|---|---|---|
| Counter-torque | 1.860.741.000 | Tool for preventing crankshaft rotation | 2.8 JTD 8V |
| Flange | 1.860.815.000 | Crankshaft rotation | 2.8 JTD 8V |
| Calibrated shim | 1.860.638.000 | Timing belt tensioning | 2.8 JTD 8V |
| Calibrated shim | 1.860.638.000 | Timing belt tensioning | 2.8 JTD 8V |
| Flange | 1.860.815.000 | Crankshaft rotation | 2.8 JTD 8V |
| Counter-torque | 1.860.741.000 | Tool for preventing crankshaft rotation | 2.8 JTD 8V |
| Counter-torque | 1.860.741.000 | Tool for preventing crankshaft rotation | 2.8 JTD 8V |
| Support | 1.860.635.000 | Auxiliary shaft assembly support | 2.8 JTD 8V |
| Counter-torque | 1.860.765.001 | Loosen/tighten auxiliary shaft toothed drive pulley bolt | 2.8 JTD 8V |
| Counter-torque | 1.860.765.001 | Loosen/tighten auxiliary shaft toothed drive pulley bolt | 2.8 JTD 8V |
| Counter-torque | 1.860.637.000 | Oil pump drive gear fitting check | 2.8 JTD 8V |
| Counter-torque | 1.860.637.000 | Oil pump drive gear fitting check | 2.8 JTD 8V |
| Fitting tool | 1.860.627.000 | Tool for fitting oil seal | 2.8 JTD 8V |
| Counter-torque | 1.860.765.001 | Loosen/tighten auxiliary shaft toothed drive pulley bolt | 2.8 JTD 8V |
| Counter-torque | 1.860.765.001 | Loosen/tighten toothed timing drive pulley bolt | 2.8 JTD 8V |
| Counter-torque | 1.860.765.001 | Loosen/tighten auxiliary shaft toothed drive pulley bolt | 2.8 JTD 8V |
| Support | 1.860.635.000 | Auxiliary shaft assembly support | 2.8 JTD 8V |
| Counter-torque | 1.860.765.001 | Loosen/tighten auxiliary shaft toothed drive pulley bolt | 2.8 JTD 8V |
| Support | 1.860.635.000 | Auxiliary shaft assembly support | 2.8 JTD 8V |
‹ Prev Crankcase sump and covers – oil seals on crankshaftNext › Crankshaft and flywheel – crankshaft
Parts & tools for this job For 2002 Fiat Ducato
- PARTEngine gasket setSearch: Fiat Ducato 2002 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.