1. Tooling
- Make
- Fiat
- Model
- Ducato Mk3 (250) Factory Service Manual
- Year
- 2006–2017
- Section
- Ancillary drive belt: removing - refitting › 1. Tooling
01 Engine - 2.2 HDi1. Tooling
ESSENTIAL : Observe the safety and cleanliness recommendations.
1. Tooling
![A T-shaped metal flywheel stop tool with two holes in the top bar and a protruding tab at the bottom, labeled [0198-P].](/fiat/ducato-2006-2017/assets/page_007_fig01.png)
| Tool | Reference | Designation |
|---|---|---|
| [0198-P] Figure : E5AB153T |
[0198-P] | Flywheel stop |
| [0198-E] Figure : E5AB154T |
[0198-E] | Centraliser x2 |
| [0198-M1] | Crankshaft drive tool | |
| [0198-M2] | Crankshaft drive tool bolt |
Parts & tools for this job For 2006 Fiat Ducato
- PARTEngine gasket setSearch: Fiat Ducato 2006 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.