Workshop Manuals Factory service & repair Fiat
Fiat Ducato Mk3 (250) Factory Service Manual (2006-2017)01 · 01 Engine - 2.2 HDi
01 · Engine

4. Verification

Make
Fiat
Model
Ducato Mk3 (250) Factory Service Manual
Year
2006–2017
Section
Ancillary drive belt: removing - refitting › 4. Verification
01 Engine - 2.2 HDi4. Verification · page 1 of 2
Figure : B1BPSHED

CAUTION : Mark the direction of fitting of the accessories drive belts if they are to be reused.

CAUTION warning box regarding ancillary drive belt positioning in pulley grooves

Refit the accessories drive belts.

  1. Turn the power steering pump pulley; Using a spanner ( as "c") (In the direction of the arrow ).
  2. Guide the accessories drive pulley by hand.
  3. Maintain the effort ( as "c") (In the direction of the arrow ).
  4. Refit the fixing screws (1).
  5. Tighten the fixing bolts (1), (2) to the correct torque.
  6. Remove the spanner ( as "c").
  7. Remove the tools [0198-P], [0198-E].
  8. Refit the starter.

4. Verification

Remove one accessories drive pulley fixing bolt.

Set the gearbox in neutral.

Photo showing tool [0198-M1] fitted to the accessories drive pulley, with callouts for screws [0198-M2], tool [0198-M3] and bolt [0198-M4]

Figure : B1BG1DUD

  1. Fit the tool [0198-M1].
  2. Secure the tool [0198-M1]; Using the screws [0198-M2].
  3. Fit the tool [0198-M3].
  4. Tighten the bolt [0198-M4].
  5. Rotate the crankshaft clockwise; Check that the accessories drive pulley is not warped.
  6. Engage 1st gear.
  7. Remove the tools [0198].

Parts & tools for this job For 2006 Fiat Ducato

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.