Workshop Manuals Factory service & repair Fiat
Fiat Ducato Mk3 (250) Factory Service Manual (2006-2017)01 · 01 Engine - 2.2 HDi
01 · Engine

2. Removing

Make
Fiat
Model
Ducato Mk3 (250) Factory Service Manual
Year
2006–2017
Section
Ancillary drive belt: removing - refitting › 2. Removing
01 Engine - 2.2 HDi2. Removing · page 1 of 3
Figure E5AB0LTT showing a set of four tools labeled [M1], [M2], [M3], and [M4] with the reference number [0198] in the top left corner.
  1. Crankshaft driver
  2. Crankshaft drive tool bolt
Figure E5AB05JT showing a bent metal pin tool with the reference number [0188-Q1] in the top left corner.
  1. Dynamic roller tensioner pins
Figure E5AB0C9T showing a long T-shaped extension tool with the reference number [1608-E] in the top left corner.
  1. T piece extension

2. Removing

2.1. Common operations

CAUTION : Replace the torsional vibration damper double pulley for a distance travelled greater than or equal to 160000 km, when the accessories drive belt is replaced.

Parts & tools for this job For 2006 Fiat Ducato

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.