Workshop Manuals Factory service & repair Fiat
Fiat Ducato Mk3 (250) Factory Service Manual (2006-2017)01 · 01 Engine - 2.2 HDi
01 · Engine

3. Refitting

Make
Fiat
Model
Ducato Mk3 (250) Factory Service Manual
Year
2006–2017
Section
Ancillary drive belt: removing - refitting › 3. Refitting
01 Engine - 2.2 HDi3. Refitting · page 1 of 2
Diagram of the ancillary drive belt system showing numbered components: 2, 4, 5, 6, 7, 8. An arrow indicates rotation direction.

CAUTION : Mark the direction of fitting of the accessories drive belts if they are to be reused.

Move aside the ancillary drive pulley, pivoting it on the fixing bolt (2).

Disconnect the air conditioning compressor connector (4); By means of a screwdriver.

Remove :

  • The dynamic roller tensioner (3) fixing bolts (5)
  • The dynamic roller tensioner (3)

CAUTION : Check that the rollers (6),(7) and (8) rotate freely (no play and no stiffness).

Remove the accessory drive belts.

3. Refitting

CAUTION : Adhere to the tightening torques.

CAUTION : Replace the torsional vibration damper double pulley for a distance travelled greater than or equal to 160000 km, when the accessories drive belt is replaced.

3.1. Vehicle with air conditioning

Parts & tools for this job For 2006 Fiat Ducato

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.