01 · Engine

3. Checking (page 4 of 6)

Make: Fiat
Model: Ducato Mk3 (250) Factory Service Manual
Year: 2006–2017
Section: Timing chain: removing - refitting

01 Engine - 2.2 HDi3. Checking · page 4 of 6

Diagram of the oil sump (6) showing the gasket surface and a close-up inset of the sealant bead application on the joint face.

Figure : B1EG0YOD

CAUTION : Clean the gasket faces with an approved descaling product. Do not use abrasives or sharp tools on the joint faces. The seal faces should not show any traces of impacts or scratches.

CAUTION : Always replace : The oil sump (6).

CAUTION : Clean the bolt threads and taps before refitting.

Apply a bead of index "E10" sealant to the periphery of the timing cover (6).

‹ Prev Next ›

Parts & tools for this job For 2006 Fiat Ducato

PARTTiming belt kitSearch: Fiat Ducato 2006 timing belt kit
TOOLEngine timing tool setSearch: Fiat engine timing tool set
TOOLTorque wrenchSearch: 3/8 inch torque wrench

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.