3. Refitting (page 4 of 4)

• The timing cover (15)
• The timing cover fixing bolts (15) (without tightening)
• The sealing ring (New) ( as " g ") (See the corresponding operation)

Centre the timing cover; Using tool [0191-2S].
Tighten : The timing cover fixing bolts (15).

Refit :

• Filter (14)
• The circlip (13)
• The tensioning roller (12)
• The cover (11)
• The tube (8)
• The dipstick guide (10)
• The cap (9)
• The cap (7)
• The ancillary drive pulley (5)
• The (6) bolt

Immobilitise the accessories drive pulley (6); Using tool [0191-2K].
Tighten the bolt (6).

Refit :

• The casing (3)
• The 2 plugs (2)

Reposition the tube (1).

Refit :

• The accessories drive belt(s) (see the relevant operation)
• The power unit assembly (see the relevant operation)