Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Grande Punto Factory Service Manual (2005-2012)17 · Body fittings
17 · Body & interior

Tunnel cover - r.r

Make
Fiat
Model
Grande Punto Factory Service Manual
Year
2005–2012
Section
Body interior fittings and trim › Tunnel cover - r.r
Body fittingsTunnel cover - r.r

TUNNEL COVER - R.R

Operation 7040L20 · CABIN FLOOR COVERING

Removing

- Work on both sides.

Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.

Op. 7040L22 REAR COVER ON TUNNEL - R.R.

Op. 7040L37 GEAR LEVER TRIM - R.R

1. Loosen the front trim retaining bolts.

2. Disconnect the electrical connection.

DescriptionComponent
CIGAR LIGHTER/CURRENT SOCKETSee P050 CIGAR LIGHTER / CURRENT SOCKET
TUNNEL COVER - R.R

1. Unscrew the rear trim retaining nuts.

2. Remove the trim.

TUNNEL COVER - R.R

Refitting

- Check that the trim is not damaged.

- Position the trim in its housing.

- Tighten the nuts and the trim bolts.

- Connect the electrical connection.

Op. 7040L37 GEAR LEVER TRIM - R.R

Op. 7040L22 REAR COVER ON TUNNEL - R.R.

Op. 7040A65 CONSOLE SIDE CLOSING (ONE) - R.R.

Parts & tools for this job For 2005 Fiat Grande Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.