SOUNDPROOFING PANEL ON PASSENGER COMPARTMENT FRONT BULKHEAD - R.R WITH HEATER OR AIR CONDITIONING UNIT REMOVED

Operation 7095E20 · VARIOUS BODY INSULATION ELEMENTS

Removing

Op. 3330B02 PEDAL ASSEMBLY - R.R

Op. 5040C68 CONDENSATE DRAIN PIPE AND ANITI-CONDENSATION FILTER - ARRANGE

Op. 7025A24 BONNET LID OPENING LEVER - R+R

1. Release the retaining buttons using the special tool.

2. Unscrew the accelerator pedal end travel stop.

3. Disconnect wiring (3a) from soundproof panel (3b) by undoing retainers (3c).

4. Cut the soundproof panel along the broken line (4a) to release the panel from the passenger compartment wiring (4b).

5. Remove the soundproof panel.

Refitting

- Check that the soundproof panel is not damaged.

- Position the soundproof panel in its seat. If a new panel is fitted, cut it in the same way as the removed panel so that it can be passed through the passenger compartment wiring.

- Connect the wiring to the soundproof panel and do up the retainers.

- Screw in the accelerator pedal end travel stop.

- Attach the retaining buttons.

Op. 7025A24 BONNET LID OPENING LEVER - R+R

Op. 5040C68 CONDENSATE DRAIN PIPE AND ANITI-CONDENSATION FILTER - ARRANGE

Op. 3330B02 PEDAL ASSEMBLY - R.R