BONNET LID OPENING LEVER - R+R

Operation 7025A24 · BONNET LID

Removing

Op. 7040L42 FRONT DOOR RUNNING BOARD CONNECTOR (ONE), LEFT OR RIGHT - R.R.

1. Undo the bolt (1a) fixing the bonnet release lever.

1. Move the control lever (2a) slightly until the retainer (1a) is released from the opening (1b).

2. Rotate the control lever (2a) until the retainer (2b) is released from the housing (2c) in the bodyshell.

1. Disconnect the ends (1a) of the control cable (1b) from the lever retainers.

2. Keep the lever.

Refitting

- Check that the opening control lever is not damaged.

- Connect the control cable terminals to the lever.

- Attach the lever retainers to the bodyshell.

- Tighten the lever retaining bolt.

Op. 7040L42 FRONT DOOR RUNNING BOARD CONNECTOR (ONE), LEFT OR RIGHT - R.R.