Lateral acceleration and slewing sensor - r.r
- Make
- Fiat
- Model
- Grande Punto Factory Service Manual
- Year
- 2005–2012
- Section
- Traction control › Lateral acceleration and slewing sensor - r.r
BrakesLateral acceleration and slewing sensor - r.r
LATERAL ACCELERATION AND SLEWING SENSOR - R.R
Removing
- Disconnect the negative battery terminal.
Op. 7040L22 REAR COVER ON TUNNEL - R.R.
1. Disconnect the electrical connection from the lateral acceleration and yaw sensor.
| Description | Connector | |
|---|---|---|
| 1 | Slewing sensor (VDC) | See K074 SLEWING SENSOR (VDC) |
2. Unscrew nuts (2a) and remove the lateral acceleration and yaw sensor (2b).
Refitting
- Refit the lateral acceleration and yaw sensor and tighten the nuts to the specified torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Lateral acceleration sensor / slewing sensor | Nut | M6 | 0.7 ÷ 1.1 |
Position the sensor with the stamped arrow in the direction of motion.
- Connect the electrical connection of the lateral acceleration and yaw sensor.
Op. 7040L22 REAR COVER ON TUNNEL - R.R.
- Connect the negative battery terminal.
Parts & tools for this job For 2005 Fiat Grande Punto
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.