Detonation sensor (one) - r.r.
- Make
- Fiat
- Model
- Grande Punto Factory Service Manual
- Year
- 2005–2012
- Section
- Engine ignition › Detonation sensor (one) - r.r.
Electrical equipmentDetonation sensor (one) - r.r.
DETONATION SENSOR (ONE) - R.R.
Removing
- Position the vehicle on a lift.
- Disconnect the negative battery terminal.
1. Disconnect the electrical connection (1a), undo the bolt and remove the detonation sensor (1b).
| Description | Connector | |
|---|---|---|
| 1a | Detonation sensor -2 | See K050 DETONATION SENSOR |
Refitting
- Place the detonation sensor back in its housing, connect the electrical connection and tighten the new bolt to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Detonation sensor | Bolt (to be replaced) | M8 | 2.2 ÷ 2.7 | 1.2 8v 1.4 8v |
- Connect the negative battery terminal.
- Remove the vehicle from the lift.
Parts & tools for this job For 2005 Fiat Grande Punto
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.