Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Grande Punto Factory Service Manual (2005-2012)08 · Engine
08 · Engine

Turbocharger air intake pipe - r.r.

Make
Fiat
Model
Grande Punto Factory Service Manual
Year
2005–2012
Section
Engine air supply circuit › Turbocharger air intake pipe - r.r.
EngineTurbocharger air intake pipe - r.r.

TURBOCHARGER AIR INTAKE PIPE - R.R.

Operation 1048A50 · VACUUM AIR CIRCUIT

1.9 Multijet

Removing

- Position the vehicle on a lift.

Op. 1016A10 SOUND-PROOFING COVER - R.R

Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R

1. Loosen the band and disconnect the oil vapour pipe from the turbocharger air inlet pipe.

2. Disconnect the band and remove the air intake pipe to the turbocharger.

TURBOCHARGER AIR INTAKE PIPE - R.R.

Refitting

- Connect the turbocharger air inlet pipe and secure it using the band.

- Connect the oil vapour pipe to the turbocharger air inlet pipe and secure it using the band.

Op. 1048A23 COLD AIR INTAKE FOR AIR FILTER - R.R

Op. 1016A10 SOUND-PROOFING COVER - R.R

- Remove the vehicle from the lift.

Parts & tools for this job For 2005 Fiat Grande Punto

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.